Instructions / Assembly

Assembly — Hanging the Fan (continued)

Installing the canopy

WARNING: Make sure the tab on the mounting bracket (A)

properly sits in the groove in the hanger ball (D) before attaching

the canopy (B) to the mounting bracket (A) by turning the canopy

housing until it drops into place.

Make sure connections are neatly tucked into the ceiling

outlet box.

Slide the canopy (B) up to the mounting bracket (A) and place

the key holes on the canopy (B) over the loose canopy mounting

screws (DD) on the mounting bracket (A). Turn the canopy (B)

clockwise until it locks in place at the narrow section of the

key holes. Make sure the positioning pin (HH) on the mounting

bracket falls into one of two holes (II) on the canopy, and then

tighten the two canopy mounting screws (DD).

Attach the canopy bottom cover (C) to the canopy by inserting

the screw heads into the key slots in the canopy bottom cover

NOTE: Adjust the canopy mounting screws (EE) as necessary

until the canopy (B) and canopy bottom cover (C) are snug.

Attaching the canopy bottom cover

Outlet Box