Instructions / Assembly

Lamp
Female plug
Male plug
Fuse
Wire
□ Put the lamp (B) into the tube (A). See Figure 1.
□ Repeat step 1 until all the lamps are into the the tubes. See Figure 2.
NOTE:
Before assembly, carefully remove inspect all parts as listed in the
Package Contents table. If any part appears missing or damaged, do not
assemble this product. Contact Hampton Bay Customer Service.
Assembly
E
F
Accessories package
G
2
Fig.1
Fig.2
A
B
100
Tube
100
WARNING: Risk of fire. Do not replace the attachment plug. The plug contains
a safety device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
WARNING: Risk of fire. Replace the fuse only with 3 Amp, 125 Volt fuse
(provided with product).
1.Grasp the plug and remove from the receptable or other outlet device. Do not unplug by
pulling on the cord.
2.Slide open the fuse cover on top of the attachment plug towards the blades.
3.Remove the fuse (C) carefully.
4.Slide the fuse access cover close on top of the attachment plug.
User Servicing Instructions
REPLACING THE FUSE
REPLACING THE LAMP
CAUTION:
Risk of fire. Do not deliberately reposition either lamp holder
contact.
WARNING: Before using or reusing, inspect the product carefully. Discard any
products that have cut, damaged, or trayed wire insulation or cords, cracks in
the lamp holders or enclosures, loose connections, or exposed copper wire.
CAUTION:
no llatsni ton oD )a :kcohs cirtcele dna erif fo ksir eht ecuder oT
trees having needles, leaves or branch coverings of metal or materials which
look like metal, and b) Do not mount or support strings in a manner that can cut
or damage wire insulation.
When the product is placed on a live tree, the tree should be well maintained and
fresh. Do not place on live trees in which the needles are brown or break off easily.
Keep the tree holder filled with water.
Use and Care Instructions
STORAGE GUIDELINES
When storing the product, carefully remove the product from wherever it is placed,
including tree, branches, or bushes, to avoid any undue strain or stress on the product
conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.
If the product is placed on a tree, the tree should be well secured and stable.
C
C
D
E
F
G
A
B
Base
Blub
A
B
A
B
1.Remove the old lamp from the tube (A).
2.Remove the old bulb from the base.
3.Insert the new bulb to the base.
4.Insert the new lamp to the tube (A).
5.Repeat step 1 to step 4 until all the lamps are into the the tubes.