Use and Care Manual

Deck Post Installation

Installing the solar lights

Preparing the solar lights

□ Position one of the solar lights (A) over a deck post.

□ Attach the solar light (A) to the deck post by

inserting screws (AA ) through the holes in the

bottom of the solar light (A) and into the deck post.

□ Repeat these steps for the other solar light (A).

NOTE: To allow each battery to reach full capacity

and perform correctly, pull out the plastic tab and

place the solar light in full sunlight for the rst 12

hours. Failure to do so can shorten the life of the

battery or operation of the light. On cloudy or rainy

days it may take several days for the batteries to fully

charge.

NOTE: To protect the solar panel from damage, do

not use force during assembly. Keep the plastic

shades in the packaging until you need to install

them.

□ Remove the protective film from the solar panels

located on top of the cover (B).

□ Move the solar light (A) switches to the ON position.