Use and Care Manual

11 HAMPTONBAY.COM
Please contact 855-HD-HAMPTON for further assistance.
Assembly (continued)
9
Assembling the Dome
Assembly
10
Assembling the Cylinder
Attach the dome assembly to the burner assembly
(C) using wing nuts (KK).
Connect the preassembled regulator assembly from
the burner assembly (C) to a 20-lb. LP-gas cylinder
(sold separately). Line up threads on the cylinder
fitting with those on the regulator and rotate
clockwise until tight. HAND TIGHTEN ONLY. DO
NOT USE ANY HAND TOOLS TO MAKE THIS
CONNECTION. Be careful not to cross threads
when screwing in fitting.
To disconnect the LP-gas cylinder, first make sure
the cylinder valve is in the "OFF" position. Then,
turn the knob on the regulator assembly
counterclockwise until it is loose
WARNING: Before connecting, be sure there is no
debris caught in the head of the LP-gas cylinder
regulator valve or in the head of the burner and
burner ports.
A
B
KK
C
20 lbs
17.9 imch
12.2 inch
12.2 in.
20 lbs
17.9 in.