Instructions / Assembly

12
ASSEMBLY INSTRUCTIONS
SAFETY CHECK
Checking for Leaks
Your patio heater has been checked at all factory
connections for leakage. To check the connection at
the gas hose/regulator/cylinder:
a. Make leakage solution by mixing 1 part liquid dish
soap and 3 part water.
b. Spoon or brush several drops (or use squirt bottle)
of the solution onto the gas hose/regulator and
regulator/cylinder and hose connection.
c. Turn on gas cylinder valve. Inspect the
connections and look for bubbles.
d. If no bubbles appear, the connection is safe.
e. If bubbles appear, there is leakage. Loosen and
re-tighten this connection. If it still leaks, please
call customer service at: 1-855-CHANT-US
(1-855-242-6887).
11
11. Attach strap inside of Cylinder
Housing Assembly (G) to secure
cylinder. Then, close door on
Cylinder Housing Assembly (G) to
complete installation.