Instructions / Assembly
INSTALLING THE NEW PHOTOCELL SWITCH
5. Insert the new photocell neck through hole that was vacated by the old photocell
switch. Adjust the hex nut on the neck, such that enough of the neck protrudes out
from the hole to allow the decorative nut to thread onto the neck
DUSK
-
TO
-
DAWN PHOTOCELL SWITCH
from
the
hole
to
allow
the
decorative
nut
to
thread
onto
the
neck
.
6. Using one of the wire nuts, attach the short wire of the photocell switch to the black
wire of the fixture.
REINSTALLING THE FIXTURE
DUSK
TO
DAWN
PHOTOCELL
SWITCH
REPLACEMENT INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
REINSTALLING
THE
FIXTURE
7. Using one of the wire nuts, attach the long wire of the photocell switch to the black
supply wire of the building/house. Using the last wire nut, attach the white fixture
wire to the white supply wire.
8
Cfll hh i i i h lb Pl hfi h
GENERAL
All electrical connections mus
t
b
e in accordance with local and
N
ational Electrical Code
Turn off the main power at the circuit breaker before replacing the photocell, in order to
prevent possible shock.
8
.
C
are
f
u
ll
y pus
h
t
h
e w
i
re connect
i
ons
i
nto t
h
e out
l
et
b
ox.
Pl
ace t
h
e
fi
xture over t
h
e
outlet box and secure it onto the mouting bracket using the thumb nuts.
9. Turn on the power at the main circuit breaker box.
INSTALLATION IS NOW COMPLETED
(N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain
the services of a qualified electrician.
Remove the parts from the box and make sure that no parts are missing by referencing the
illustrations on the installation instructions.
FIXTURE UNINSTALLATION
1. CAUTION: Turn off the power at the main circuit breaker box prior to
performing the photocell replacement to prevent possible shock.
2
R
th
fi t
f
th
ll
b
li
th
fi t ’
th b
t
Cfll
ll
2
.
R
emove
th
e
fi
x
t
ure
f
ro
m
th
ewa
ll
b
y
l
oosen
i
ng
th
e
fi
x
t
ure
’
s
th
um
b
nu
t
s.
C
are
f
u
ll
y
p
u
ll
the fixture from the wall. Leave the existing mounting bracket on the outlet box.
Untwist the wire nuts to disconnect the fixture from the building/ house supply wires.
Keep the thumb nuts and wire nuts.
UNINSTALLING THE EXISTING PHOTOCELL SWITCH
UNINSTALLING
THE
EXISTING
PHOTOCELL
SWITCH
3. Loosen the decorative nut. Untwist the wire nut to disconnect the photocell wire from
the black fixture wire.
4. Pull the photocell switch from the fixture canopy. Discard the photocell switch. Keep
the
wire
nut
and
decorative
nut
.
the
wire
nut
and
decorative
nut
.