Use and Care Manual

Care and Cleaning
To clean, unplug lamp and wipe with a damp, non-abrasive cloth.
Troubleshooting
Minor problems often can be fixed without an electrician. Before doing any work on the light, shut off power
supply to avoid electrical shock.
Problem
Solution
Bulbs won't light
Bulbs are burned out
Cause
Power is off
Bad wire connection
Bad switch
Replace the bulb
Check if power supply is on
Test or replace the switch
Consult a qualified electrician
Check wiring
Check the wiring connection
Consult a qualified electrician
Fuse blows or circuit breaker trips when
the lamp is turned on.
Crossed wires or power wire is
grounding out.
6