MSDS

MSDS REPORT
NO.: ASZ10030811001 Date: Mar 20, 2010 Page 2 of 6
Material Safety Data Sheet
Section 1 - Chemical Product and Company Identification
Product Name: NI-Cd AA 1.2V
Manufacture: /
Address: /
Tel: +86-755-2850-9555
Emergency Telephone: +86-755-2850-9555
Fax: +86-755-2850-6266
Email: hukejun@unitechbatt.com
Section 2 - Hazards Identification
Fatalness grade: In accordance with Directive 1999/45/EC, the sample belongs to dangerous.
Invasion route: Skin touch: Contact with electrolyte solution inside battery may cause serious burns to skin tissues. Contact
with nickel compounds may cause result in chronic eczema or nickel itch.
Eyes touch: In the case of a fire or cell rupture the electrolyte solution inside battery is extremely corrosive to
eye tissue and may result in permanent blindness. Contact with nickel oxide may cause minor
irritation.
Inhalation: No exposure possible except in the case of fire of abuse. Effects of inhalation of cadmium and/or
nickel compounds vary from mild irritation of nasal mucous membranes to damage of lung tissues
proper. Inhalation of cadmium oxide may cause dry throat, cough, headache, vomiting, chest pain
and chills. Chronic overexposure to cadmium compounds may result in pulmonary edema,
breathing difficulty, prostration, and kidney damage.
Ingestion: Ingestion of electrolyte solution causes tissue damage to throat area and gastro/respiratory tract.
Ingestion of nickel compounds causes nausea and intestinal disorders.
Health hazards: These chemicals are contained in a sealed can. Risk of exposure occurs only if the battery is mechanically or
electrically abused.
Environment hazards: The electrolyte of the battery have harm to the soil, water.
Burn & burst danger: Do not dispose of battery in fire and recharge battery-may explode. Do not short-circuit battery –may
cause burns.
These cells and batteries manufactured from them may be highly charged and are capable of high-energy discharge. Care
should be taken to handle cells properly to avoid shorting or misuse that will result in rapid uncontrolled electrical, chemical, or
heat energy release.
Do not break open cell.
Do not allow an exposed flame or spark to come near the cells.