003159681 Model RTS019N USE AND CARE GUIDE Crestridge Padded Sling Glider - Taupe Putty Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU y through the purchase of this dining set. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................................... 2 Safety Information ............... ........................................ 2 Product Caution .................................................................... 2 Safety Warnings ............................ ........................................ 2 Warranty ........................................................................ 2 What is Covered ...............................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA FF BB GG Part Description AA BB M6x16 BOLT M6x30 BOLT CC M6x55 BOLT 4+1 DD EE M8x35 BOLT d6.5xD13x1.0 WASHER 2+1 24+2 FF d8.5xD17x1.
Pre-Assembly (continued) GLIDER PACKAGE CONTENTS E A B C D Part Description Quantity A Right Arm 1 B Left Arm 1 C Cross Brace 1 D E Bottom Frame Seat Assembly 1 1 4
l Glider Assembly 1 Connecting the glider cross brace to the glider arms Insert the right and left arms (A and B) into the cross brace (C) on both sides. Fasten them together by using M6x30 bolts (BB), d6.5xD13x1.0 washers (EE), and M6xP1.0 plastic nuts (GG). NOTE: Loosely tighten all the bolts using the hex wrenches (HH and JJ). A R B C L EE GG EE BB 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Glider Assembly (continued) 2 Connecting the glider bottom frame to the glider arms Place the arm assembly on to the bottom frame (D). Make sure that the higher tube on the bottom frame (D) is facing the front of the glider.
l Glider Assembly (continued) 3 Connecting the glider arms to the glider bottom frame Fasten the swing bars of the arm assembly to the bottom frame (D) by using M6x55 bolts (CC), d6.5xD13x1.0 washers (EE), and M6xP1.0 plastic nuts (GG). NOTE: Loosely tighten all the bolts using the hex wrenches (HH and JJ). EE EE GG EE EE A CC B D EE GG CC EE EE 7 EE HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Glider Assembly (continued) 4 Connecting the glider seat assembly to the glider arms At the front of the glider, fasten the seat assembly (E) to the arms (A and B) by using M6x16 bolts (AA) and d6.5xD13x1.0 washers (EE). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
l Glider Assembly (continued) 5 Connecting the glider seat assembly to the glider arms Fasten the seat assembly (E) to the right and left arms (A and B) by using M8x35 bolts (DD) and d8.5xD17x1.6 washers (FF). NOTE: Loosely tighten all the bolts using the hex wrench (II). E A B FF DD 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Glider Assembly (continued) 6 Tightening the bolts Turn the glider to its upright position. Once all of the bolts are in place, fully tighten the bolts. Ensure all connections are secure before use. Care and Cleaning For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Store the set in a dry, sheltered place when not in use.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.