Item # 0000000000 Model # RXHD-43-76DT USE AND CARE GUIDE DINING TABLE WITH PEDESTAL BASE Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.
Table of Contents Pre-Assembly................................................................3 Planning Assembly....................................................................3 Hardware Included....................................................................3 Package Contents.....................................................................4 Assembly........................................................................5 Care and Cleaning........................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damage to the product and/or finish, place a protective soft material down on the floor before placing product on the floor to assemble. CAUTION: IT IS THE USER’S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED PROPERLY AND SECURELY. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A D C C B E Part Description Quantity A Table Top 1 B Leg Connector 1 C Side Legs 2 D Umbrella Hole Cover 1 E Wrench 1 4
Assembly 1 Unpacking the product 2 Attaching the side legs Remove the protective wrapping and lay all parts on the floor. Identify all parts packed in the carton against the hardware and parts lists on pages 3 and 4. Lay the Table Top (A) upside down on the floor, so the bottom is facing up. Place a protective soft material on the floor before placing the Table Top (A) face down on the floor. Attach the two Side Legs (C) to the bottom of the Table Top (A) with Long Bolts (BB) and Washers (CC).
Assembly (continued) 3 Attaching the leg connector Align the holes on the end of the Leg Connector (B) to the side of the Side Legs (C). Attach the Leg Connector (B) to the Side Legs (C) with the Short Bolts (AA) and Washers (CC). Tighten the Short Bolts using the Wrench (E) after all bolts are in place. Make sure all bolts are aligned properly and tightened securely before placing Bolt Covers (DD) over the bolts.
Care and Cleaning For best results, clean regularly with mild detergent and warm water. NOTE: Insect repellents and suntan lotions can reduce the life of the weave material, accelerate fading and stain fabrics.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
