Use and Care Manual

Read the following switch usage instructions for lighting and to extinguish:

Yellow

Blue

Incorrect

Flame

Correct

Flame

Very hot while in operation!Never lean over the appliance while it is in use. Do not touch the stone, glass

screen or the spark guard while the appliance is in operation.

Wait until the appliance has cooled down after use.

Failure to comply with these instructions may result in serious bodily injury.

WARNING

Use of your appliance causes carbon residue to build up on the lava rocks

inhibiting the airflow and leading to a more yellow flame. Stir up the lava rocks

regularly to remove these deposits and maintain a blue flame.

Step 3

Step 4

Instructions for lighting and shutting down

the appliance:

1. Read instructions before lighting.

2. Press down the control knob to " LOW ", at the same time push in the ignition button and keep

the button depressing for 15 seconds.

3. If the burner is not lit in 5 seconds, press down the control knob and turn clockwise to the

"OFF" position. Repeat from step 2 after 5 minutes.

4. Adjust flame to desired height with the control knob.

Care and Cleaning

For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt

particles that may accumulate.

Do not clean with abrasive materials, bleach, or solvents.

Store the set in a dry, sheltered place when not in use.

Keep the set away from re, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet,

snow, or wind.

You must make periodic checks to ensure that all connections are secured.