Use and Care Manual

l
8
Chair Assembly (continued)
4
Tightening the bolts
Place cushions (E and F) onto the chair.
Once all of the bolts are in place, fully tighten the bolts.
Ensure all connections are secure before use.
D
E
Care and Cleaning
For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the set in a dry, sheltered place when not in use.
Keep the set away from re, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet,
snow, or wind.