Installation Guide

Page 1
Page 4
PHOTOCELL
● TIME ON/OFF (Photocell is not needed,use Cap provided)
EX: To set the light on at 6:30 PM and off at 1:20AM.
1. Press MENU button to choose TIME ON/ OFF mode, the green
light lit and the screen flash, press OK button. When ON is displayed,
press OK button.
2. AM and PM LED lights flash, press UP/DOWN button to choose
PM, press OK button.
3. Hour position flashes, press UP/DOWN button to adjust the hour to
6 then press OK button.
4. Minute position flashes, press UP/DOWN button to adjust the minute to30 then press OK button. OFF would be displayed then press
OK button.
5. AM/PM LED lights flash, press UP/DOWN arrow button to choose
AM. Press OK button.
6. Hour position flashes, press UP/DOWN button to adjust the hour to
1 then press OK button.
7. Minute position flashes, press UP/DOWN button to adjust the
minute to 20 then press OK button. Current time will be displayed.
Time on/off mode is now set.
● Remark
1. Any misoperation can be re-set by pressing MENU button.
2. For further function setting, please see the Use and Care Guide.
3.Press MENU button and the timer modes will cycle through. The
green indication light will show the current mode selection. Any
mistakes can be canceled by cycling back through the MENU button
and starting the operation over again.
4.Press the resettable overload breaker located at the bottom if the
transformer is tripped.
Quick Reference Guide
THIS QUICK REFERENCE GUIDE CAN BE
DOWNLOAD FROM WWW.HOMEDEPOT.COM
ALWAYS CONNECT THE PHOTOCELL BEFORE SET
PHOTOCELL
SLIMLINE SERIES METAL SERIES