SDS

Product name
Ni-MH Battery
Revision date
28-Jun-
2017
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 6 / 11
Appropriate engineering controls
Showers. Eyewash stations. Use with local exhaust ventilation.
Individual protection measures, such as personal protective equipment
Respiratory protection If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA
approved respiratory protection should be worn. Positive-pressure supplied air
respirators may be required for high airborne contaminant concentrations.
Respiratory protection must be provided in accordance with current local
regulations.
Hand protection
Wear protective gloves.
Eye/face protection Wear safety glasses with side shields (or goggles).
Skin and body protection Wear suitable protective clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance
Solid
Color
No information available
Odor
Odorless
Odor Threshold
Not determined
pH
Not determined
Melting point/freezing point
Not determined
Boiling point / boiling range
Not determined
Flash point
Not applicable
Evaporation rate
Not determined
Flammability (solid)
Not flammable
Flammability Limit in Air
Not applicable
Vapor pressure
Not determined
Vapor density
Not determined
Density
Not determined
Relative density
Not determined
Bulk density
Not determined
Specific gravity
Not determined
Water solubility
Insoluble in water
Partition coefficient (LogPow)
Not determined
Autoignition temperature
Not determined
Decomposition temperature
Not determined
Kinematic viscosity
Not determined
Dynamic viscosity
Not determined
Explosive properties
Not an explosive
Oxidizing properties
Not determined
Other information
No information available
10. STABILITY AND REACTIVITY
Reactivity
No known effects under normal use conditions.
Chemical stability
Stable under normal conditions
Possibility of hazardous reactions
When a battery cell is exposed to an external short-
circuit, crushed, modification, high temperature, open flames, it
will be the cause of heat generation and ignition.
Conditions to avoid