Full Product Manual

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
5
Install the Diffuser
□
□
Align the mounting tabs on the diffuser (B) with
the bracket on the edge of the housing (A).
Put 2 palms on the diffuser (B) and rotate it
clockwise to the housing (A) and conrm it
locks into place by hearing a "click" sound.
6
Turn on the Light
□
□
Restore power to the junction box.
Turn the light switch on to activate the xture.
AA
AA
A
BB
B
A
BB
B
A
1
Removing the Diffuser
□ Put 2 palms on the diffuser (B) and rotate it
counterclockwise to remove it from the
housing (A).
2
Install Mounting Screws
□ Install the mounting screws (BB) onto the
junction box (not included) and leave a little gap.
Fix the Housing
4
□ Align the keyholes on the housing (A) with the
mounting screws (BB). Then rotate the housing (A)
to securely t to the junction box and tighten
screws (BB) to secure.
3
Connect the Wires
□ Connect the black and white wires of the
xture with two wires of the same colors from
the junction box. Secure together using wire
nuts (AA).
□ Connect the grounding wire of the xture with
the one from the junction box. Secure together
using a wire nut (AA).
CAUTION: With the small spaceinside junction box for
electrical wiring. Check wiring to make sure it is not cut or
damaged which can cause an electrical short.