Instructions / Assembly

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Troubleshooting
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
There is no power and the logs do not glow. The unit does not have power.
Check that unit is plugged into a standard 120
volt outlet. Then make sure power is set at
“ON” position.
Power cord gets warm to the touch. Normal operation.
This is normal for a heater appliance as it
requires more current to operate. Check the
connections of the appliance cord and the
outlet. Make sure the plug ts tightly into the
outlet. During use, check the plug and outlet
frequently to determine if it is HOT; if so,
discontinue use of the appliance and consult
with a qualied electrician to check or change
the overheating outlet(s).