Instructions / Assembly

ManualsBrandsHampton Bay ManualsFire Pits35 in. Square Gas Fire Pit

CA65 Propane Warning

5 HAMPTONBAY.COM

Please contact 855-HD-HAMPTON for further assistance.

Pre-Assembly

PLANNING ASSEMBLY

TOOLS REQUIRED

Adjustable Wrench

Philips screwdriver

Before beginning assembly of product, make sure all parts are present.

If any part is missing or damaged, do not attempt to assemble the

product.

Contact customer service for replacement parts.

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Quantity

BB 30

CC 1

Description

NOTE: Tools are not included in the package.

CC（Pre-assembled）

M6 x 15 Bolt

D6 Washer

Allen Wrench

WARNING: FUELS USED IN LIQUEFIED PROPANE GAS

APPLIANCES, AND THE PRODUCTS OF COMBUSTION OF SUCH

FUELS, CAN EXPOSE YOU TO CHEMICALS INCLUDING BENZENE,

WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE

CANCER AND CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE

HARM. For more information go to: www.P65Warnings.ca.gov.

ADVERTENCIA: LOS COMBUSTIBLES USADOS EN EQUIPOS

PARA LICUAR GAS PROPANO, ASÍ COMO LOS PRODUCTOS DE SU

COMBUSTIÓN, PUEDEN EXPONERTE A SUSTANCIAS QUÍMICAS,

ENTRE ELLAS EL BENCENO, QUE EL ESTADO DE CALIFORNIA

RECONOCE COMO CAUSA DE CÁNCER Y DE MALFORMACIONES

CONGÉNITAS Y OTROS DAÑOS AL SISTEMA REPRODUCTOR.

Para más información, visite www.P65Warnings.ca.gov.

Summary of content (6 pages)

PAGE 1
CA65 Propane Warning WARNING: FUELS USED IN LIQUEFIED PROPANE GAS APPLIANCES, AND THE PRODUCTS OF COMBUSTION OF SUCH FUELS, CAN EXPOSE YOU TO CHEMICALS INCLUDING BENZENE, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. For more information go to: www.P65Warnings.ca.gov.
PAGE 2
13.
PAGE 3
Assembly 1 Assembling the Back Panel 3 Attaching the Crossbars Attach the back panel (C) to the left hind leg (H) and right hind leg (I) with four M6 x 15 bolts (AA) and four D6 washers (BB) using the Allen wrench (CC). Attach the right panel (E) to the right foreleg (G) and right hind leg (I) with four M6 x 15 bolts (AA) and four D6 washers (BB) using the Allen wrench (CC). Do not fully tighten hardware until entire step is completed.
PAGE 4
Assembly (continued) 4 6 Attaching the Door Handle Attaching the Cylinder Holder Attach the cylinder holder assembly (L) to the front panel (B) and back panel (C) with four M6 x 15 bolts (AA) and four D6 washers (BB) using the Allen wrench (CC). Do not fully tighten hardware until entire step is completed. Loosen the screw on the door handle (N), then attach the door handle (N) to the door panel (D) using a Phillips Screwdriver (not included).
PAGE 5
13.
PAGE 6
Cylinder Installation PLANNING INSTALLATION Use two or more people for an easier installation. Do not place the appliance on grass or dirt. 1 Placing the Gas Cylinder Fig. 10 Open the door panel (D) and place the cylinder in the holder assembly. 2 Securing the Gas Cylinder Turn the cylinder locking bolt clockwise to secure the gas cylinder. D 3 Attaching the Regulator Attach the regulator to the cylinder and turn clockwise by hand. Fig.