Use and Care Manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the
purchase of these lights. Westrive to continually create quality products designed to
enhance your home. Visit us online to see our full line ofproducts available for your
home improvement needs. Thank you for choosing Hampton Bay!
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed
including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
WARNING: THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY
EXITS
WARNING: When products are used in outdoor applications, connect to a
Ground Fault Circuit interrupting (GFCI) outlet. If one is not provided, contact
a qualied electrician for proper installation.
WARNING: Do not mount or place near gas or electric heaters, replaces,
candles or other similar sources of heat.
WARNING: Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails.
WARNING: Do not let lamps rest on the supply cord or on any wire.
WARNING: Unplug the product when leaving the house, or when retiring
for the night, or if left unattended.
WARNING: This is an electric product-not a toy! To avoid risk of re, burns,
personal injury and electric shock it should not be played with or placed
where small children can reach it.
WARNING: Do not use this product for other than its intended use.
WARNING: Do not hang ornaments or other objects from cord, wire or
light string.
WARNING: Do not close doors or windows on the product or extension
cords as this may damage the wire insulation.
WARNING: Do not cover the product with cloth, paper or any material not
part of the product when in us.
WARNING: This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock. This plug will t
in a polarized outlet only one way. If the plug does not t fully in the outlet,
reverse the plug. If it still does not t, contact a qualied electrician. Do not
use with an extension cord unless the plug can be fully inserted. Do not alter
or replace the plug.
WARNING: This product employs overload protection (fuse). A blown fuse
indicates an overload or short circuit situation. If the fuse blows, unplug the
product from the outlet. Also unplug any additional strings or products that
may be attached to the product. Replace the fuse as per the instructions in
this manual (follow the product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short circuit may be present
and the product should be discarded.
USE AND CARE GUIDE
VINTAGE ST64 BULB STRING LIGHT
Item #1007 929 689
Model #ST64-12-24B
Warranty
For warranty information on this product, contact Hampton Bay Customer
Service.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit
www.HAMPTONBAY.com.
Supplier’s Declaration of Conformity: 47 CFR x 2.1077 Compliance
Information
Responsible Party: Novolink, Inc. • 14860 Central Ave., Chino, CA.
91710 USA • Phone: [phone]
Unique Identier: ST64-12-24B
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate the
receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for
help. Any changes or modications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.