003183449 Model TCS28PJ USE AND CARE GUIDE Crestridge 3-Piece Padded Sling Balcony Height Set - Conley Denim Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU y through the purchase of this dining set. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................................... 2 Safety Information ............... ........................................ 2 Product Caution .................................................................... 2 Safety Warnings ............................ ........................................ 2 Warranty ........................................................................ 2 What is Covered ...............................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB Part Description AA BB M6x16 BOLT d6.5xD13x1.0 WASHER CC 4 mm ALLEN KEY WRENCH CC Quantity 12+1 12+1 1 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued) TABLE PACKAGE CONTENTS D A C B Part Description Quantity A Table top 1 B Table leg 4 C Center connector 1 D Tile 4 4
l Table Assembly 1 Connecting the table legs to the table top Place the table top (A) upside down on a soft surface. Attach the table legs (B) to the table top (A) using M6x16 bolts (AA) and d6.5xD13x1.0 washers (BB). NOTE: Loosely tighten all the bolts using the hex wrench (CC). B B B B AA BB A 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Table Assembly (continued) 2 Attaching the leg connector Attach the center connector (C) to the table legs (B) using M6x16 bolts (AA) and d6.5xD13x1.0 washers (BB). NOTE: Loosely tighten all the bolts using the hex wrench (CC).
l Table Assembly (continued) 3 Tightening the bolts and placing the tiles Once all of the bolts are in place, fully tighten the bolts. Turn the table right side up. Then put the tiles (D) onto the table top (A) carefully. Ensure all connections are secure before use. D A Care and Cleaning For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
1003182508 Model KTS877H USE AND CARE GUIDE Crestridge 3-Piece Padded Sling Balcony Height Set - Conley Denim Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU y through the purchase of this dining set. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................................... 2 Safety Information ............... ........................................ 2 Product Caution .................................................................... 2 Safety Warnings ............................ ........................................ 2 Warranty ........................................................................ 2 What is Covered ...............................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC DD Part Description Quantity AA BB M6x14 BOLT M6x35 BOLT 10+1 4+1 CC d6.5xD13x1.0 WASHER 14+1 DD 4 mm ALLEN KEY WRENCH 1 3 HAMPTONBAY.
Pre-Assembly (continued) CHAIR PACKAGE CONTENTS A C B D E Part Description Quantity A Seat Assembly 1 B Left Leg 1 C Right Leg 1 D Cross Brace 1 E Support Brace 1 4
l Chair Assembly 1 Connecting the chair seat assembly to the chair leg Place the left leg (B) onto a non-abrasive surface, such as a carpet. At the front of the chair, fasten the seat assembly (A) to the left leg (B) by using M6x14 bolts (AA) and d6.5xD13x1.0 washers (CC). NOTE: Loosely tighten all the bolts using the hex wrench (DD). Keep 3mm Gap. Don’t fully tighten the Bolts. CC AA A CC AA B L 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Chair Assembly (continued) 2 Connecting the chair cross brace and support brace to the chair left leg Insert the support brace (E) into the left leg (B). The holes in the support brace (E) must be facing towards the inside of the chair. Fasten the support brace (E) to the left leg (B) by using M6x14 bolts (AA) and d6.5xD13x1.0 washers (CC). At the rear of the chair, fasten the cross brace (D) to the left leg (B) by using M6x14 bolts (AA) and d6.5xD13x1.0 washers (CC).
l Chair Assembly (continued) the chair right leg to the chair seat assembly, cross brace and 3 Connecting support brace Repeat steps 2 and 3 for the right leg (C). NOTE: Loosely tighten all the bolts using the hex wrench (DD). C R A D E 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Chair Assembly (continued) 4 Connecting the chair seat assembly to the chair legs At the back of the chair, fasten the seat assembly (A) to the legs (B and C) by using M6x35 bolts (BB) and d6.5xD13x1.0 washers (CC). NOTE: Loosely tighten all the bolts using the hex wrench (DD).
l Chair Assembly (continued) 5 Tightening the bolts Turn the chair to its upright position. Once all of the bolts are in place, fully tighten the bolts. Ensure all connections are secure before use. Care and Cleaning For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Store the set in a dry, sheltered place when not in use.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
