SKU/Model: # xxx /SW20006 ORB # xxx /SW20006 MBK # xxx /SW20006 BN CLARET TBA
READ AND SAVE THESE INSTRUCTIONS.
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. And we warrant the LED light kit to be free from defects in workmanship and material present at time of shipment from the factory for a period of 3 years after the date of purchase by the original purchaser.
15+1 spare Fiber washer Locking plate screw Light kit plate screw MM 15+1 spare
Mounting plate Light kit plate L 9W LED bulb 2
GG FF HH EE Loosen the two set screws (II) from the coupling of the fan motor assembly (H) B NN B GG NN II FF EE HH GG B NN NN FF II
Hanging the fan motor assembly to the mounting bracket OO OO
E the the the B
Installing the canopy and canopy cover in JJ JJ
Installing the mounting plate to the fan motor assembly Insert the blade (A) through the slot on the fan motor assembly (H). Attach the fan blade (A) to the fan motor assembly (H) using the three blade screws (AA) and the three fiber washers (BB) and tighten them securely. Repeat this step for the other four blades (A). Remove one of the screws (KK) from the locking plate of the fan motor assembly (H) and loosen the other two screws (KK), but do not remove.
Attaching the light kit plate to the mounting plate Remove one of the screws (LL) from the mounting plate (I) and loosen the other two screws (LL), but do not remove. 10 Installing the LED bulbs Install the two 9W LED bulbs (L) into the sockets (QQ). While holding the light kit plate (J) under your fan, firmly snap the wire connection plugs (PP) together. Place the key holes from the light kit plate (J) over the two screws (LL) previously loosened from the mounting plate (I).
11 Installing the glass and pull chain fob Attach the glass (K) to the light kit plate (J) by twisting tightly. (DO NOT OVERTIGHTEN) Attach the pull chain fob (MM) to the chain on the light kit plate (J).
RR The 3-speed pull chain (SS) J The light kit pull chain (TT) Reverse Function The reverse switch (RR) is located on the surface of the light kit plate (J).
Balancing kit includes an additional instruction manual within the packet.
Fiber washer Mounting plate Light kit plate L Locking plate screw Locking plate screw 9W LED bulb MM
HAMPTON BAY CF552KP-02
