Use and Care Manual
WARNING: This appliance has a polarized plug (one blade is wider than
the other).The polarized plug is not intended to be used in non-polarized
outlets (having both slots the same size). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug, if it still does not fit,
contact a qualified electrician. Do not modify the plug in anyway.
USER SERVICING INSTRUCTIONS
1.Grasp plug and remove from the receptacle or other outlet device. Do not yank
the cord to unplug.
2. Select a suitable tool such as a small flat screwdriver or travel scissors.
3. To open the fuse cover. Slide open fuse access cover on top of attachment
plug toward blades. (see fig.1)
4. Carefully remove the fuse by prying it out. (see fig.2)
5. Risk of fire can result by using wrong fuse rating. Replace fuse only with 2.5
Amp, 125 Volt rating.(not included)
6. To close the fuse access cover. Slide to close access cover on top of
attachment plug. (see fig.3)
Fig.1 Fig.2 Fig.3
WARNING
：Risk of fire, Do not replace attachment plug. Contains a safety device (fuse) that
should not be removed. Discard product if the attachment plug is damaged.
3
WARNING: To reduce the risk of electric shock and injury to persons, do
not use in a window
WARNING: To reduce the risk of fire or electrical hazard, DO NOT USE THIS
FAN WITH ANY SOLID STATE SPEED CONTROL DEVICE.
READ ALL INSTRUCTIONS BEFORE USING
1. Use this unit only as described in this manual. Other uses not recommended may cause fire,
hazards or electric shock.
2. This product is intended for HOUSEHOLD use, for indoor, non-commercial, non-industrial,
general domestic use in cooling rooms and is not intended for use in windows. Do not use the
product outdoors or for any other purpose.
3. To protect against electrical shock, always use on a dry level surface, do not place fan in
window, immerse unit, plug or cord in water, or spray with liquids.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug the unit from the outlet if left unattended or not in use, when moving fan from one
location to another and before cleaning.
6. Never submerge unit in water.
7. Do not operate the unit in the presence of explosive and/or flammable fumes.
8. Do not place the unit or any parts near an open flame, cooking or other heating appliance.
9. Never insert fingers or any other object through the Fan Guards. Never drop or insert objects
into any opening of the product.
10. Never plug this unit in with a wet hand or wet cord.
11. Do not operate the unit with a damaged cord or plug, Discard fan or return to an authorized
service facility for examination and / or repair.
12. Avoid contacting with moving fan parts.
13. To disconnect, grip the plug and pull it from the outlet. Never yank the cord.
14. Do not operate if the fan housing is removed or damaged.
15. To maintain operating efficiently, user should not operate the product 24 hours a day, seven
days a week.
16. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area
and where it will not be tripped over.
17. This product employs overload protection (fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse
as per the user servicing instructions (follow product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short-circuit may be present and the product
should be discarded or returned to an authorized service facility for examination and/or repair.
2
IMPORTANT SAFEGUARDS