Use and Care Manual

CLEANING INSTRUCTIONS
WARNING: To avoid the risk of electrical shock, always make sure the product
is unplugged from the electrical outlet before cleaning or servicing.
CAUTION: This fan is not intended to be disassembled for cleaning for
internal
parts (e.g. blade, motor). Disassembly may result in product damage.
Never use liquids or abrasive cleaners to clean the product.
1. Wipe the exterior surfaces with a soft damp cloth. Dust can be removed from the
Guard and Blades with a small vacuum.
2. Do not immerse the motor, switch or wires in water and never allow water to drip
into blade or motor housing.
3. Do not use any chemical cleaners such as acid, alcohol, etc, to clean the fan.
4. Make sure the fan is completely dry after cleaning.
CARE AND MAINTENANCE
WARNING: Do not attempt to open any part of the Motor Housing, as a
risk of electrical shock may exist. This product has been permanently
lubricated at the factory and will not require further lubrication for the life
of the product. Additional lubrication of electric motor parts could create
a fire hazard.
1. The product must be packaged in its original box and stored in a room with
low humidity.
2. Make sure the product is completely dry before using at any time
NOTE: If you experience a problem, please return the fan to the place of
the original purchase. Do not attempt to open the motor housing
yourself, doing so may cause damage to the fan or personal injury.
MADE IN CHINA
5