Installation Guide

Assembly (continued)

Attaching the long and short rails

□ Attach the short rail (G) to the top (A) by inserting two wood

dowels (CC) into the top (A), positioning the short rail (G)

over the two dowels (CC) and securing together using three

4×55 mm screws (GG).

□ Insert the cam bolts (BB) attached to the long rails (H) into

the holes along the side of the upper left and right side

panels (C and D).

□ Insert three cam locks (AA) into the appropriate holes on

the upper left and right side panels (C and D). Secure the

long rails (H) to the panels (C and D) by turning the cam

locks (AA) clockwise until they lock into place over the cam

bolts (BB).

□ Cover the six cam locks (AA) with covers (GG).

Attaching the side panels and bottom

front rail

□ Position the bottom of the left and right side panels (C

and D) against the sides of the bottom (B). Ensure that the

wood dowels (CC) and cam bolts (BB) are fully inserted into

the appropriate holes.

□ Insert four cam locks (AA) into the four corner holes of

the bottom (B) and secure the left and right side panels

(C and D) to the bottom (B) by turning the cam locks (AA)

clockwise until they lock into place over the cam bolts (BB).

□ Place the bottom front rail (E) over the front of the

assembly. Secure together by inserting four cam locks (AA)

into the front bottom corners of the assembly and turning

the cam locks (AA) clockwise until they lock into place over

the cam bolts (BB).

C B