Installation Guide

Assembly (continued)

Preparing the bottom, side panels,

and bottom front rail

□ Insert sixteen wood dowels (CC) into the appropriate holes

along the sides of the bottom panel (C), left side panel (F),

and right side panel (G).

□ Screw two cam bolts (BB) into the appropriate holes on the

right side of the left side panel (F).

□ Screw two cam bolts (BB) into the appropriate holes on the

left side of the right side panel (G).

□ Screw four cam bolts (BB) into the appropriate holes on the

bottom front rail (H).

Attaching the long rails and top trim

□ Insert the cam bolts (BB) attached to the long rails (K) into

the holes along the side of the upper left and right side

panels (D and E).

□ Insert three cam locks (AA) into the appropriate holes on

the upper left and right side panels (D and E). Secure the

long rails (K) to the panels (D and E) by turning the cam

locks (AA) clockwise until they lock into place over the cam

bolts (BB).

□ Cover the six cam locks (AA) with covers (GG).

□ Attach the top trim (J) to the hutch top (A) by inserting two

wood dowels (CC) into the hutch top (A), positioning the

top trim (J) over the two dowels (CC) and securing together

using three 4x55 mm screws (HH).