Use and Care Manual

Assembly (continued)

Attaching the lower back panel

NOTE: Before attaching the back panel, ensure that

the unit is at 90°.

□ Attach the lower back panel (N) to the back of the bottom

assembly using twelve 3x14 mm screws (DD).

Attaching the upper left and right side

panels

□ Place the upper left and right side panels (D and E) on top

of the bottom assembly. Ensure that all cam bolts (BB) and

wood dowels (CC) are fully inserted in all holes.

□ Secure the left and right side panels (D and E) to the

bottom assembly by inserting four cam locks (AA) into

the bottom panel holes (D and E) and turning the cam

locks (AA) clockwise until they lock into place over the cam

bolts (BB).

□ Cover the four cam locks (AA) with covers (GG).