Installation Guide

ManualsBrandsHampton Bay ManualsStorage & OrganizationSelect Topper 2-Door MDF Wall Cabinet in White

1

2

3

4

5

6

7

8

9

8

Assembly (continued)

To adjust the vertical height.

Loosen the four screws "A" on both hinges.

Two of them are usually in slotted holes which

mean and you can adjust up or down by a few

mm. Then tighten back up

To adjust depth.

Loosen screw "B" and adjust door, if the door

can not be adjusted, please loosen screw "C",

then try again.

Tighten screw "B" and "C".

To adjust side ways.

Turning the screw "C" on BOTH hinges on

each door.