OMSID # 205703191 Model # THD90069.6a.ST USE AND CARE GUIDE Elite Wardrobe Cabinet-White Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this bookcase. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . .
Pre-Assembly PLANNING ASSEMBLY Compare all parts with the Hardware Included and Package Contents lists in this manual. If any part appears missing or damaged, do not assemble this product. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com. TOOLS REQUIRED Flathead screwdriver Phillips screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A G F J D I H C B E Part A B C D E F G H I J Description Top Quantity 1 1 1 1 1 1 1 1 1 1 Bottom Left Side Panel Right Side Panel Bottom Front Rail Fixed Shelf Back Panel Left Door Right Door Hanging Rod 4
Assembly 1 2 Assembling the rod holder Preparing the top , bottom panel , fixed shelf and bottom front rail □ Insert eight wood dowels (a) into the top (A) and fixed shelf (F). □ Useing four screws (g) fixed two rod holders (c) with the left side panel (C) and right side panel (D). □ Insert eight wood dowels (a) into the bottom panel (B) and bottom front rail (E). a A C B g c F D E 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 3 Assembly framework □ Connect left side panel (C) and top (A) , bottom panel (B) , bottom front rail (E) and fixed shelf (F) , Ensure that the wood dowels (a) are fully inserted into the appropriate holes. □ Using screwdriver to tighten seven screws (b) , make sure the finished sides of the panel face in toward the mantle. □ The same assembly step for right side panel (D). □ Cover the fourteen screws (b) with cover caps (i).
Assembly (continued) 4 Assembling the back panel and strap □ Fasten the back panels (G) to the assembled unit using thirty-three screws (d) , Do not over tighten the screws. □ Opening the safety strap kit , screw the washer and strap to the back panel (G) as the picture showing below. d Before attaching the back panel be sure that the unit is at 90° G C B 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 5 Assembling the hanging rod and hinge □ Insert hanging rod (J) into the two rod holder (c). □ Through four screws (g) with one hinge (h) to lock on the side panel , the same assembling step for the other hinges (h).
Assembly (continued) 6 Assembling the door □ Through two screws (g) with one hinge (h) to lock on the door , the same assembling step for the other hinges (h). □ Through two bolts (e) connection knob (f) with the door (H and I) , the same assembling step for the other knob (f). f A e I H h g 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) To adjust the vertical height. Loosen the four screws "A" on both hinges. Two of them are usually in slotted holes which mean and you can adjust up or down by a few mm. Then tighten back up To adjust depth. Loosen screw "B" and adjust door, if the door can not be adjusted, please loosen screw "C", then try again. Tighten screw "B" and "C". To adjust side ways. Turning the screw "C" on BOTH hinges on each door.
Assembly (continued) 7 Securing the cabinets to the wall WEIGHT LIMITS □ Drill a 3/16" diameter hole (5mm) in the wallboard. Tap the wall anchor into the hole until it is flush. Fasten the safety strap to the wall anchor with the long screw. □ This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. WARNING: Please ensure that all the objects are removed before moving the assembled unit.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.