Instructions / Assembly

ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the xture; lay out all parts on clean surface.
2. Turn off power at main fuse box.
3. Mount the crossbar (3) to junction box (1) wiht 2 mounting screws (2) supplied.
4. Fasten open end of ground wire (bare copper or green wire, to ground wire or
ground screw of junction box or ground screw on crossbar (3).
5. Connect black wire of xture to black wire of power supply and white wire of
xture to white wire of power supply.
NOTE: All wire connections should be made with wire nuts (4) or marettes (included)
and pushed back into the junction box (1)
6. Mount back plate or canopy (6) over the 2 screws (5) of crossbar (3).
7. Secure with 2 decorative knobs or caps (7)
BULB INSTRUCTIONS:
1. Install 50W Max GU10 Shielded Bulbs (8) (Included).
ASSEMBLY:
1. Junction Box (not included)
2. Mounting Screw (x2) 5. Screw (x2)
7. Cap (x2)
6. Canopy
8. GU10 50W (x5)
3. Cross Bar
4 Wire Nut (x3)
Page 4 Page 5
Black / White / Ground