Use and Care Manual
6
Operation
1
Using the Fan
□ Place the fan on a solid, at surface.
□ Plug the fan into a 120V/60Hz power outlet.
□ Press the buttons on the fan to choose your desired speed
setting:
□ 0 – Off
□ 1 – Low speed
□ 2 – Medium speed
□ 3 – High speed
Maintenance
WARNING: Risk of re. Do not replace attachment
plug. It contains a safety device (fuse, AFCI, LCDI)
that should not be removed. Discard product if the
attachment plug is damaged.
REPLACING THE FUSE
□ Grasp the plug to unplug the fan. Do not unplug by pulling on the cord.
□ Open fuse cover. The manufacturer shall indicate the specic way to open the cover, such as, “Slide open fuse access cover on top of
attachment plug towards blades,” or “Push on tabs located next to the blades.”
□ Remove fuse carefully. The manufacturer shall indicate the appropriate way to remove the fuse, such as whether to push the fuse from
the other side or turn fuse holder over to remove fuse.
□ Risk of re. Replace fuse only with 2.5 Amp, 125 volt fuse (provided with product).
□ Close fuse cover. The manufacturer shall indicate the specic way to close the cover, such as, “Slide closed the fuse access cover on
top of attachment plug,” or “Push cover closed so that all tabs latch.”