Instructions / Assembly

Assembly (continued)

Attaching the Solar Receiver

Attach the solar receiver (N) to the umbrella shade (F) by turning the solar receiver (N) clockwise until fully tightened.

NOTE:

Please leave the solar receiver (N) out in a sunny area to

charge before the ﬁrst time turning on the LED lights.

①

②

Insert the umbrella shade (F) into the base tube (C) using M6x20 bolt (BB) and hex wrench S5 (FF).

Fully tighten all the bolts at this step.

Shake the canopy to separate the umbrella ribs before opening the umbrella.

Inserting the umbrella Shade Into the Base Tube

①

②

③