Item #948-958 Model #UXS01601C USE AND CARE GUIDE E/O 11 FT SOLAR UMBRELLA Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU ually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents .......................................................... 2 Warranty ......................................................................... 2 What is Covered .......................................................................2 What is Not Covered ................................................................2 Pre-Assembly ................................................................ 2 Planning Assembly ........................................................
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Part Dess cription Quantity I J K Side panel I 2 Side panel J Sand bag Lower base cover Support tube rim Upper base cover Solar energy receiver 2 1 A Lower bracket 1 B C D E Upper bracket Pole 1 1 1 1 L M F G H Metal sheet Umbrella shade Corner connector 1 1 N O Knob Tube rim 2 2 1 1 4 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly 1 Attaching the upper bracket Attach the upper bracket (B) onto the lower bracket (A). NOTE: This umbrella should be set up in its desired location to avoid moving it after assembly.
Assembly (continued) 2 Attaching the pole to the brackets Attach the pole (C) to the upper bracket (B) and lower bracket (A) by using M8x20 hex bolts (AA) and M8 washers (BB). NOTE: Fully tighten all bolts using the wrench (CC). C AA BB A B 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 3 Inserting corner connectors Insert the corner connectors (H) into the four ends of the attached brackets.
Assembly (continued) 4 Sliding the side panels Slide the side panels (J) downward between the corner connectors (H). J J H H 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 5 Sliding the side panels Slide the side panels (I) downward between the corner connectors (H). Connect the two pieces of the support tube rims (M). Slide the support tube rims (M) down the pole (C) and connect it to the brackets (A and B).
Assembly (continued) 6 Placing the sand bag Place the sand bag (K) in the umbrella base. K 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 7 Filling the sand bag Pull open the velcro pouch on the sand bag (K) and fill with sand. After filling the sand bags (K), close the pouch and ensure the velcro is sealed. Lock the two sections of the sand bags (K) together. NOTE: The sand bags (K) are to be filled with sand only. NOTE: For proper stability of your offset umbrella, the minimum weight of the sand to be placed into each sand bag is 110lbs for a total of 220lbs.
Assembly (continued) 8 Ensuring the locking mechanism is in the open position Ensure the locking mechanism (1) is in the OPEN position by using the wrench (CC). Attach the lower base covers (L) to the side panels (I). Close the lower base covers (L) and ensure they are fully closed. L I 1 L 1 CC 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 9 Locking the lower base covers Lock the lower base covers (L) in place by turning the 12 locking mechanisms (1) to the CLOSE position using wrench the (CC). Attach the upper base cover (N) to the assembled base.
Assembly (continued) 10 Attaching the metal sheet Attach the metal sheet (F) to the pole (C) by using the knob (D). Insert the tube rim (E) into the pole (C). E F C D 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 11 Inserting the umbrella pole Insert the straight umbrella pole into the handle (1) of the umbrella shade (G). Attach the curved pole of the umbrella shade (G) to the straight umbrella pole by turning the screw cap clockwise (2). Ensure that the screw cap is not over tightened.
Assembly (continued) 12 Attaching the solar energy receiver Attach the solar energy receiver (O) to the top of the umbrella pole by turning the solar energy receiver (O) clockwise until fully tightened. Insert the plug into the plug hole of the solar energy receiver (O). O 15 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 13 Inserting the umbrella into the pole Insert the umbrella shade (G) into the pole (C). Use the knob (D) to secure the umbrella shade (G) to the pole (C).
Operation 1 Raising the umbrella Loosen the knob on the handle (1) by turning counterclockwise. Slide the umbrella handle upward (2) until it stop and the umbrella is fully extended. Tighten the knob on the handle clockwise (3) to lock the handle in place. 3 1 2 17 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Operation (continued) 2 Opening the umbrella The crank handle must be on top of the pole, in the up position, prior to opening the umbrella. Slowly turn the crank clockwise to open the umbrella. When the umbrella is open fasten the belt (2) around the pole to stabilize the umbrella.
Operation (continued) 3 Operating the umbrella Press the light switch (1) to turn the light on and off. Loosen the knob on the umbrella handle by turning it counterclockwise (3), then slide the umbrella handle down to adjust the angle of the umbrella. When adjusting the umbrella angle release the belt (2) from the pole. When the umbrella is at the ideal angle to shade the sunlight, tighten the knob clockwise (4). 1 3 4 19 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Operation (continued) 4 Adjusting the umbrella Loosen the knob on the umbrella handle counterclockwise (1). Use one hand to hold the umbrella handle and the other hand to turn the umbrella pole to adjust the direction of the sunshade (2). The umbrella can turn up to 360 degrees. When the umbrella is at the desired position, tighten the knob clockwise.
Operation (continued) 5 Closing the umbrella Prior to closing the umbrella, move the crank handle to the top of the pole in the up position (1). To close the umbrella, turn the crank counterclockwise (2). When the umbrella is closed, loosen the knob on the umbrella handle by turning it counterclockwise (3). Pull the umbrella handle downward. Tie the umbrella closed using the fasteners (4). NOTE: The umbrella should NOT be closed in the tilted position.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 6 p.m., EST, Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo Núm. 948-958 Modelo Núm. UXS01601C GUÍA DE USO Y MANTENIMIENTO SOMBRILLA SOLAR COLGANTE DE 3,35 M ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay. de Lunes a Viernes entre 8 a.m. y 6 p.m., (Hora Estándar del Este) 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS paraguas nte crear productos de calidad diseñados para mejorar tu hogar.
Tabla de Contenido Preensamblaje .............................................................. 2 Tabla de Contenido ....................................................... 2 Garantía.......................................................................... 2 Qué Cubre la Garantía ..............................................................2 Qué No Cubre la Garantía ........................................................2 Herrajes Incluidos ..............................................................
Preensamblaje (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad Pieza Descripción Cantidad I J K Panel lateral I 2 Panel lateral J Bolsa de arena Cubierta de la base inferior Casquillo de soporte del tubo Cubierta de la base superior Receptor de energía solar 2 1 A Soporte inferior 1 B C D E Soporte superior Poste 1 1 1 1 L M F G H Plancha metálica Sombrilla Conector para esquina 1 1 N O Perilla Casquillo del tubo 2 2 1 1 4 3 HOMEDEPOT.
Ensamblaje 1 Cómo instalar el soporte superior Coloca el soporte superior (B) en el soporte inferior (A). NOTA: Debes instalar esta sombrilla en el lugar elegido para evitar moverla después del ensamblaje.
Ensamblaje (continuación) 2 Cómo instalar el poste a los soportes Fija el poste (C) al soporte superior (B) y al soporte inferior (A) con los pernos hexagonales M8x20 (AA) y las arandelas M8 (BB). NOTA: Aprieta completamente todos los pernos con la llave (CC). C AA BB A B 5 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Ensamblaje (continuación) 3 Cómo insertar los conectores para esquina Inserta los conectores para esquina (H) en los cuatros extremos de los soportes ensamblados.
Ensamblaje (continuación) 4 Cómo deslizar los paneles laterales Desliza los paneles laterales (J) hacia abajo entre los conectores para esquina (H). J J H H 7 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Ensamblaje (continuación) 5 Cómo deslizar los paneles laterales Desliza los paneles laterales (I) hacia abajo entre los conectores para esquina (H). Une las dos piezas de los casquillos de soporte del tubo (M). Desliza los casquillos de soporte del tubo (M) hacia abajo del poste (C) y conéctalos a los soportes (A y B).
Ensamblaje (continuación) 6 Cómo colocar la bolsa de arena Coloca la bolsa de arena (K) en la base de la sombrilla. K 9 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Ensamblaje (continuación) 7 Cómo llenar la bolsa de arena Abre el velcro de la bolsa de arena (K) y llénala con arena. Después de llenar las bolsas de arena (K), cierra la bolsa y asegúrate que el velcro quede sellado. Une y asegura las dos secciones de las bolsas de arena (K). NOTA: Debes rellenar las bolsas (K) solamente con arena. NOTA: Para la estabilidad apropiada de tu sombrilla colgante, el peso mínimo de la arena en cada saco debe ser de 110 lb para un total de 220 lb.
Ensamblaje (continuación) 8 Cómo asegurarte de que el mecanismo de cierre esté en la posición abierta Con la llave (CC), asegúrate de que el mecanismo de cierre (1) esté en la posición de OPEN (ABIERTA). Cómo instalar las cubiertas de la base inferior (L) a los paneles laterales (I). Cierra las cubiertas de la base inferior (L) y asegúrate de que estén completamente cerradas. L I 1 L 1 CC 11 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Ensamblaje (continuación) 9 Cómo cerrar las cubiertas de la base inferior Cierra las cubiertas de la base inferior (L) en su lugar girando los 12 mecanismos de cierre (1) a la posición de CLOSE (CERRADO) con la llave (CC). Conecta la cubierta de la base superior (N) a la base ensamblada.
Ensamblaje (continuación) 10 Cómo montar la plancha metálica Monta la plancha metálica (F) al poste (C) usando la perilla (D). Inserta el casquillo del tubo (E) en el poste (C). E F C D 13 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Ensamblaje (continuación) 11 Cómo instalar el poste de la sombrilla Coloca el poste recto de la sombrilla dentro de la manija (1) de la sombrilla (G). Une el poste curvo de la sombrilla (G) al poste recto girando la tapa de tornillo de izquierda a derecha (2). Asegúrate de que la tapa de tornillo no esté demasiado apretada.
Ensamblaje (continuación) 12 Cómo montar el receptor de energía solar Monta el receptor de energía solar (O) a la parte superior del poste de la sombrilla girando el receptor de energía solar (O) de izquierda a derecha hasta que quede bien apretado. O 15 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Ensamblaje (continuación) 13 Cómo instalar la sombrilla en el poste Inserta la sombrilla (G) en el poste (C). Usa la perilla (D) para asegurar la sombrilla (G) al poste (C).
Funcionamiento 1 Cómo levantar la sombrilla Desliza la manija de la sombrilla hacia arriba (2) hasta que se detenga y la sombrilla quede completamente extendida. Aprieta la perilla sobre la manija de izquierda a derecha (3) para trabar la manija en su lugar. 3 1 2 17 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Funcionamiento (continuación) 2 Cómo abrir la sombrilla La manija debe estar en el extremo superior del poste, en la posición de subir, antes de abrir la sombrilla. Gira lentamente la manija de izquierda a derecha para abrir la sombrilla. Cuando la sombrilla esté abierta, ajusta la correa (2) alrededor del poste para estabilizar la sombrilla.
Funcionamiento (continuación) 3 Cómo usar la sombrilla Para encender y apagar las luces, presiona el interruptor (1). ra ajustar el ángulo de la sombrilla. Cuando ajustes el ángulo de la sombrilla, suelta la correa (2) del poste. Cuando la sombrilla se encuentre en el ángulo ideal para proteger de la luz solar, aprieta la perilla de izquierda a derecha (4). 1 3 4 19 HOMEDEPOT.COM Para más ayuda, por favor, llama al 1-855-HD-HAMPTON.
Funcionamiento (continuación) 4 Cómo ajustar la sombrilla Usa una mano para sostener la sombrilla y la otra para girar el poste de la sombrilla para ajustar la dirección del parasol (2). La sombrilla puede girar hasta 360 grados. Cuando la sombrilla esté en la posición deseada, aprieta la perilla de izquierda a derecha.
Funcionamiento (continuación) 5 Cómo cerrar la sombrilla Antes de cerrar la sombrilla, mueve la manija hacia el extremo superior del poste en la posición subir (1). Gira la manija de derecha a izquierda (2) para cerrar la sombrilla. Hala la manija de la sombrilla hacia abajo. Cierra la sombrilla atándola con los sujetadores (4). NOTA: La sombrilla NO debe cerrarse en posición inclinada.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay De Lunes a Viernes entre 8 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para su uso en el futuro.