Instructions / Assembly

6
3
Securing the fixture to the outlet box
4
Securing the globe
□ Align the holes on both sides of the mounting plate
(AA) with the holes on both sides of the wall plate (A).
□ Place the wall plate (A) over the mounting plate (AA).
□ Use a Philips screwdriver to screw the mounting screws
(DD) through the holes on the wall plate (A) into the
holes on the mounting plate (AA).
This fixture can be installed as an up-light or a down-
light.
□ Place the globe (C) over the socket (B).
□ Screw the socket ring (D) onto the socket (B) to
secure the globe (C).
5
Installing a bulb
□ Screw a light bulb (sold separately) (60 Watts maximum
medium-base incandescent) into the socket (B).
You can use a LED equivalent energy-saving bulb that
does not exceed 8 Watts (sold separately).