Instructions / Assembly

14
Installation
10
DEEP WALL CABINET
o Remove drawer(s) and install shelf (shipped separately in carton)
through open top of cabinet. Shelf cannot be installed through the
door opening.
o Double-door wall cabinet shelves require additional support. Shelf
support kits will be packaged with each respective cabinet.
o Shelf supports must be installed into the back of the frame below
each shelf with the support ledge under the shelf.
o A cylindrical shelf support must be screwed into the middle of the
cabinet back under each shelf once the final adjustment is made.
INSTALLER NOTE: Install shelves before installing the countertop.
WARNING: DO NOT install a Deep Wall Cabinet
independently. Failure to follow this warning may result
in the cabinet falling off the wall, which may cause
serious personal injury or property damage that will
not be covered by the product warranty. Manufacturer
assumes no responsibility for any product failure due to
improper installation or installation inconsistent with these
instructions.
Both sides of the face frame must be supported through
both left and right frame stiles by another cabinet, a wall,
or an End Filler.
Install four (4) screws
through hanger rail into
wall studs
Install four (4) 1-1/2"
screws through end
panel of 15" Deep Wall
Cabinet into adjacent
cabinet frame stile
15" Deep Wall Cabinet (shown
with doors removed to make
illustration easier to understand)
Supported Through Back and
Adjacent 12" Deep Wall Cabinets
Install four (4)
screws through
hanger rail into
wall studs
Install two (2)
screws through
frame rail into
soffit framework
15" Deep Wall Cabinet (shown
with doors removed to make
illustration easier to understand)
Soffit framework
Supported Through Back and Framework in Ceiling Soffit
CAUTION:
DO NOT hang
15" deep wall
cabinets
independently
IMPROPER INSTALLATION
Install four (4) screws
through hanger rail into
wall studs
Install four (4) 1-1/2"
screws through end
panel of 15" Deep Wall
Cabinet into adjacent
cabinet frame stile
15" Deep Wall Cabinet (shown
with doors removed to make
illustration easier to understand)
Supported Through Back and
Adjacent 12" Deep Wall Cabinets
Install four (4)
screws through
hanger rail into
wall studs
Install two (2)
screws through
frame rail into
soffit framework
15" Deep Wall Cabinet (shown
with doors removed to make
illustration easier to understand)
Soffit framework
Supported Through Back and Framework in Ceiling Soffit
CAUTION:
DO NOT hang
15" deep wall
cabinets
independently
IMPROPER INSTALLATION
Install four (4) screws
through hanger rail into
wall studs
Install four (4) 1-1/2"
screws through end
panel of 15" Deep Wall
Cabinet into adjacent
cabinet frame stile
15" Deep Wall Cabinet (shown
with doors removed to make
illustration easier to understand)
Supported Through Back and
Adjacent 12" Deep Wall Cabinets
Install four (4)
screws through
hanger rail into
wall studs
Install two (2)
screws through
frame rail into
soffit framework
15" Deep Wall Cabinet (shown
with doors removed to make
illustration easier to understand)
Soffit framework
Supported Through Back and Framework in Ceiling Soffit
CAUTION:
DO NOT hang
15" deep wall
cabinets
independently
IMPROPER INSTALLATION
UP
Shelf
FigureA
SIDEOFCABINET
UP
Shelf
FigureB
SIDEOFCABINET
UP
Shelf
FigureB
SIDEOFCABINET
UP
Shelf
FigureA
SIDEOFCABINET
UP
Shelf
FigureB
SIDEOFCABINET
UP
Shelf
FigureB
SIDEOFCABINET
UP
Shelf
FigureA
SIDEOFCABINET
UP
Shelf
FigureB
SIDEOFCABINET
UP
Shelf
FigureB
SIDEOFCABINET
11
DOUBLE DOOR CABINET SHELVES