Full Product Manual

10
Assembly (continued)
11
(OPTIONAL) Adjusting the door
□ Door hinges are 6-way adjustable.
□ Up or down adjustment – Loosen screw 1, align the door,
and tighten screw 1.
NOTE: It is critical that you do NOT overtighten screw 1.
□ Left or right adjustment – Turn screw 2 clockwise or
counterclockwise.
□ In or out adjustment – Turn screw 3 clockwise or
counterclockwise.
1
3
2
1 2 3
12
Installing the shelves
NOTE: Do not install shelves until the cabinet assembly has
been fully installed.
□ Tilt one shelf (E) to t inside the face frame and set it on
the bottom inside the cabinet.
E
□ Tilt the next shelf (E) to t inside the face frame and place
shelf pins (DD) at the desired locations underneath the
shelf. Lower the shelf to snap over the shelf pins. Install
this shelf at the desired position of the higher shelf.
E
DD