Instructions / Assembly

ManualsBrandsHampton Bay ManualsOther2-Light Tuscan Copper Wall Sconce

5.Place the CANOPY (13) back onto the NIPPLE (4), and secure into place using the

DECORATIVE NUT (14) provided. Side the CANDLE COVER (15) onto the socket.

6. Screw light bulbs into the threaded sockets and make sure they do not exceed the

maximum wattage specified on the fixture’s wattage rating label

INSTALLATION IS NOW COMPLETED

WALL MOUNT FIXTURE

ASSEMBLY & INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them

at a later date.

GENERAL

All electrical connections must be in accordance with local and National Electrical

Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring

connections obtain the services of a qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts

are missing by referencing the illustrations on the installationinstructions.

ASSEMBLY AND INSTALLATION

1.Thread the HEX NUT (5) onto the NIPPLE (4), and screw the NIPPLE (4) onto the

MOUNTING BRACKET (2), without tightening the HEX NUT (5).

2.Pull the power supply wires out from the OUTLET BOX (1), and mount the MOUNTING

BRACKET (2) to the OUTLET BOX (1), using MOUNTING SCREWS (3).

3.Place the CANOPY (13) of the fixture over the OUTLET BOX (1) andonto the NIPPLE (4),

and adjust the NIPPLE (4) until it protrudes 1/4” out from the CANOPY (13). Remove the

CANOPY (13) and secure the position of the NIPPLE (4) by tightening the HEX NUT (5)

against the MOUNTING BRACKET (2).

4.Attach the BLACK SUPPLY WIRE (11) to the BLACK FIXTURE LEAD WIRE(12) by

using the WIRE CONNECTOR (6). In the same manner, attach the WHITE SUPPLY

WIRE (9) to the WHITE FIXTURE LEAD WIRE (10). Connect the FIXTURE GROUND

WIRE (7) to the SUPPLY GROUND WIRE (8) using a WIRE CONNECTOR (6).

ASSEMBLY AND INSTALLATION (Continued)

CAUTION

Turn off the main power at the circuit breaker before installingthe fixture, in order to

prevent possible shock.

1. OUTLET BOX

2. MOUNTING BRACKET

3. MOUNTING SCREW

4. NIPPLE

5. HEX NUT

6. WIRE CONNECTOR

7. FIXTURE GROUND WIRE

8. SUPPLY GROUND WIRE

9. WHITE SUPPLY WIRE

10. WHITE FIXTURE LEAD WIRE

11. BLACK SUPPLY WIRE

12. BLACK FIXTURE LEAD WIRE

13 CANOPY

14. DECORATIVE NUT

15. CANDLE COVER

PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com