Instructions / Assembly

9
Attaching the Fan Blades
Step 1. Attach blades to blade arms using three
screws with rubber washers. (Fig. 17) Start a
screw into the blade arm, do not tighten. Repeat
for the 2 remaining screws and washers.
Step 2. Tighten each screw securely starting with
the center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.
Step 3. Fasten the blade assemblies to the motor
housing by lining up the slots of the blade arms
with the tabs on the motor housing, then tighten
the two screws and washers already installed in the
blade arms. (Fig. 18)
NOTE
MOTOR IS SHIPPED WITH RUBBER MOTOR STOPS
TO PREVENT MOVEMENT DURING TRANSPORTA-
TION. REMOVE MOTOR STOPS PRIOR TO ATTACH-
ING BLADE BRACKETS. (FIG. 16)
Figure 16
Screws
Figure 17
Rubber packing mounts
Blade Arm
Screws with
Rubber Washers
Blade
Figure 18
Motor
Blade arm
Slot
Tab
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.