Instructions / Assembly

Preparing the canopy

Preparing the motor

Assembly

□ Remove the two non-slotted canopy mounting screws

with lock washers (MM) from the canopy (B), and

loosen the slotted canopy mounting screw with lock

washer (MM) on the canopy (B).

□ Remove the canopy (B) from the mounting bracket (A)

by turning the canopy (B) counterclockwise.

□ Remove the cotter pin (NN) and clevis pin (OO), and

loosen the two collar setscrews (PP) from the motor

collar.

□ Take out the setscrew (QQ) located in the hanger ball

(RR), lower the hanger ball (RR) and remove the

cross pin (SS). Remove the hanger ball (RR) from the

hanger ball/downrod assembly (C).

□ Remove the ground lead (TT) from the downrod

assembly (C).