Instructions / Assembly

Attaching the Fan Blades
Figure 8
Figure 9
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Attach blades to blade arms using three screws
with rubber washers (Fig. 8). Start a screw into
the blade arm, do not tighten. Repeat for the 2
remaining screws and washers.
Tighten each screw securely starting with the
center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.
Fasten the blade assemblies to the motor by
lining up the slots of the blade arms with the
tabs on the motor, then tighten the two screws
and washers already installed in the blade arms
(Fig. 9).
Repeat procedure with remaining blade arms.
1.
2.
3.
4.
Blade
Screws with
Rubber Washers
Blade Arm
Motor
Slot
Blade Arm
Tab
7