Instructions / Assembly

Table Of Contents

Attaching the blades to

the blade arms

Fastening the blade

assemblies to the motor

WARNING: To reduce the risk of personal injury, do not

bend the blade arms (D) while installing, balancing the blades

(C), or cleaning the fan. Do not insert foreign objects between

rotating fan blades (C).

□ Attach the blade (C) to the blade arm (D) using the

three blade attachment screws with rubber washers

(BB). Start a screw and rubber washer (BB) into the

blade arm (D), but do not tighten.

□ Repeat for the remaining blade attachment

screws and rubber washers (BB).

□ Tighten each screw securely starting with the center

screw. Make sure the blade (C) is straight.

□ Repeat these steps for the remaining blades (C).

□ Fasten the blade assemblies to the fan motor assembly

(B) by lining up the slots of the blade arms (JJ) with the

tabs on the motor (KK).

□ Tighten the blade arm screws with lock washers (LL)

already installed in the blade arms (D).

□ Repeat this procedure for the remaining blade arms (D).

Assembly — Attaching the Fan Blades

NOTE: Your fan blades are reversible. Select the blade side

nish which best accentuates your decor.