Instructions / Assembly
Table Of Contents
9
Installing the light bulbs
and glass shade
G
CC
E
Assembly — Installing the Light Kit (continued)
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufcient to prevent electric shock.
□ Install the 9W LED bulb (CC) (included).
□ Raise the glass shade (G) up against the switch
housing (E) and secure the glass shade (G) to the fan
by turning the glass shade (G) clockwise until snug.
Do not overtighten.
B
14