FAQ

Can I install the ceiling fan without
light kit?
□ The fan can be installed without light kit, but you will need to disassemble
the light kit from the bottom cap and use the included plastic plug to seal the
switch housing cup.
Can I use a wall switch to control
the speed and light of my ceiling
fan?
□ Yes, the ceiling fan can be controlled by certain universal ceiling fan wall
control system. Before install a wall control, you have to make sure:
1) There are two separate wires coming out of your ceiling to control the
light and fan separately.
2) The fan speed wall control must be a 3-speed switch. An example wall
control can be ordered online at www.homedepot.com. Search
”799280.”
Can I add a remote receiver to
control my ceiling fan?
□ Yes. The ceiling fan is compatible with certain universal ceiling fan
remote/receiver control system. An example remote control set can be
ordered online at www.homedepot.com. Search “202783102.”
Can I use a dimmer switch to
control my fan speed?
□ NO, you should NEVER use a dimmer switch to control a ceiling fan. It will
cause premature wear on the capacitors and the motor. It will also cause
the fan to make noise, as the motor was intended to have a 120v AC power
source at all times.
Can I use this fan outdoors?
□ No, the fan is not designed to work in high humidity (damp or wet)
conditions.
Can I use longer / shorter blades to
replace the original ones?
□ No. You can only use the blades come with the unit in the package. The
blades are designed for the motor, longer or shorter blade could cause
problem and void the warranty.