Instructions / Assembly

□ Restore power to the ceiling fan and test for proper operation.

HI, MED, LOW buttons: set the fan speed.

OFF button: turns the fan off.

button: turns the light on or off and also controls the brightness

setting. Press and release this button to turn the light on or off.

Press and hold the button to set the desired brightness. The light

button has an auto-resume, it will stay at the same brightness as

the last time it was turned off.

Operation

□ Install the 12V MN21/A23 battery (GG) (included) into the

remote control (FF). To prevent damage to the remote control

(FF), remove the battery if not used for long periods.

REMOTE CONTROL OPERATING INSTRUCTIONS

INSTALLING THE REMOTE CONTROL HOLDER

□ Remove the two remote control holder plugs (JJ) from the

remote control holder (HH). Note that the plugs have unique

tabs that allows them to ﬁt only in one hole.

□ Attach the remote control holder (HH) with the two remote

control holder mounting screws (II).

□ Replace the two remote control holder plugs (JJ) each into its

own hole.