Instructions / Assembly

Table Of Contents

Operation

PULL CHAIN OPERATING INSTRUCTIONS

Install the pull chains and fobs (JJ) onto the pull chains located in

the switch housing (K). Turn on the power and check the operation

of the fan.

The pull chain controls the fan speed as follows:

1 pull - High, 2 pulls - Medium, 3 pulls - Low, and 4 pulls - Off.

Speed settings for warm or cool weather depend on factors such

as the room size, ceiling height, and numbers of fans.

NOTE: Wait for the fan to stop before reversing the direction

of the blade rotation.

REVERSE SWITCH OPERATING INSTRUCTIONS

The reverse switch is located on the surface of the switch housing.

Slide the switch to the left for warm weather operation. Slide the

switch to the right for cool weather operation.

Warm weather - (Counterclockwise Direction) A downward air ow

creates a cooling effect. This allows you to set your air conditioner

on a warmer setting without affecting your comfort.

Cool weather - (Clockwise Direction) An upward air ow moves

warm air off the ceiling. This allows you to set your heating unit

on a cooler setting without affecting your comfort.

Reverse switch