Instructions / Assembly
Table Of Contents
- Solar LED Umbrella_HB_YJAF052_pg01
- Solar LED Umbrella_HB_YJAF052_pg02
- Solar LED Umbrella_HB_YJAF052_pg03
- Solar LED Umbrella_HB_YJAF052_pg04
- Solar LED Umbrella_HB_YJAF052_pg05
- Solar LED Umbrella_HB_YJAF052_pg06
- Solar LED Umbrella_HB_YJAF052_pg07
- Solar LED Umbrella_HB_YJAF052_pg08
- Solar LED Umbrella_HB_YJAF052_pg09
- Solar LED Umbrella_HB_YJAF052_pg10
- Solar LED Umbrella_HB_YJAF052_pg11
- Solar LED Umbrella_HB_YJAF052_pg12
- Solar LED Umbrella_HB_YJAF052_pg13
- Solar LED Umbrella_HB_YJAF052_pg14
- Solar LED Umbrella_HB_YJAF052_pg15
- Solar LED Umbrella_HB_YJAF052_pg16
- Solar LED Umbrella_HB_YJAF052_pg17
- Solar LED Umbrella_HB_YJAF052_pg18
- Solar LED Umbrella_HB_YJAF052_pg19
- Solar LED Umbrella_HB_YJAF052_pg19
- Solar LED Umbrella_HB_YJAF052_pg20
- Solar LED Umbrella_HB_YJAF052_pg21
- Solar LED Umbrella_HB_YJAF052_pg22
- Solar LED Umbrella_HB_YJAF052_pg23
- Solar LED Umbrella_HB_YJAF052_pg24
- Solar LED Umbrella_HB_YJAF052_pg25
18
Operation
1
Attaching the crank
Attach the crank (F) to the handle as shown below.
Attach the crank (F) by aligning the tap with the hole on the crank (F) until it snaps into place.
To detach the crank, the wrench (EE) is required to press the tap to take the crank (F) out.
Attach the crank (F) without using the tap.
To detach the crank (F), just take the crank out.
NOTE: Both methods of attaching the crank (F)
are acceptable.
EE
F
2
1
2
1
F
2
1
01:
02: