Instructions / Assembly

12
Assembly (continued)
8
Ensuring the locking mechanism is in the open position
Ensure the locking mechanisms on the lock panel (M) are in the OPEN position by using the wrench (CC) as shown in figure 1.
Ensure the locking mechanisms on the lower base covers (H) are in the OPEN position by using the wrench (CC) as shown in figure 2.
Attach the lower base covers (H) to the side panels (L).
Close the lower base covers (H) and ensure they are fully closed.
CC
H
CC
L
CLOSE POSITION
OPEN POSITION
OPEN POSITION
CLOSE POSITION
CC
CC
M
re 1
re 2