Use and Care Manual

12
Assembly (continued)
8
Ensuring the locking mechanism is in the open position
Ensure the locking mechanism on the lock panel (M) is in the OPEN position by using the wrench (CC) as shown in figure 1.
Ensure the locking mechanism on the lower base cover (H) is in the OPEN position by using the wrench (CC) as shown in figure 2.
Attach the lower base cover (H) to the side panels (L).
Close the lower base cover (H) and ensure they are fully closed.
CC
H
CC
L
1
2
CLOSE POSITION
OPEN POSITION
OPEN POSITION
CLOSE POSITION
CC
CC
M