User's Manual

16
[Error Messages]
The following message appears when the Windows OS was not installed properly.
Create a folder (\WINDOWS\COMMAND\EBD in Windows 98,
\WINDOWS\COMMAND\EBD in Windows ME, or \XP_Bootable in Windows XP) and
copy system files to the folder.
The following message appears when the size of the Public Area is insufficient.
Increase the size of the Public Area by using the Resize function.
[Note] When you carry out the above procedure, the booting files are created on the
device. Make sure to prevent them from being erased. If they are erased,
normal booting is impossible.
4.4 Recovery Disk
This feature is used when you wish to initialize the device because you cannot use it
due to problems in the device. If there are any bad blocks in the Flash Memory, you can
use Scan Disk to initialize it. However, the capacity of the device decreases for bad
blocks.
1) As shown below, select Start → Programs → U-Storage → Recover Disk on your
desktop.