User's Manual

19
Precautions for Use
- Never remove Mobile Disk until the flashing of the LED completely stops.
Otherwise, the data may be lost.
- In order to safely remove the drive, select Unplug from "Unplug or Eject
Hardware" from the Control Panel before removing it.
- HANA Micron Inc. does not take responsibility for data loss due to any reason
except inherent defect of the product.
- When an error message appears while saving data, check the connection of the
device, and the Write Protect switch on the side (for corresponding products,
except HANA Mobile Disk).
- If the problem is not solved by any above method, format the device completely.
To format it, run the U-Storage Manager Program contained on the CD supplied
with the product (See 4.2).
- The U-Storage Manager Program supports the format for general Windows as
well as complete formats for Flash Memory to enable the safe and efficient use
of the product.