User Manual

ManualsBrandsHanchen ManualsHand ToolsESD Tester Anti Static Wrist Strap Tester Whole Body Tester for ESD Equipment 9V Battery Power Supply

Hanchen Instrument

TR7131/TR7132 Human Body Comprehensive

Tester

Product overview

The human body static electricity comprehensive tester, by measuring the resistance

of the system, is convenient and quick. Using the LED indicator light and the prompt

voice to tell whether the tester passes the test. The test time is less than 2 seconds.

The TR7131 provides four different specifications of wrist band test holes. The

wristband and shoes can be tested at the same time, and the access control signal

output function can be purchased.

The product is designed according to the requirements of the following standards

and meets the measurement requirements of anti-static bracelet and shoes:

-American National Standard

ANSI-ESD-S20.20-2014 Electrostatic Discharge (ESD) Association Standard

-Electronic Industry Standard of the People's Republic of China

SJ/T10694-2006 General Specification for Anti-static Testing of Electronic Product

Manufacturing and Application System

-National Military Standard of the People's Republic of China

GJB3007A-2009 Technical Requirements for Anti-static Work Area

Adjustment and calibration

The human body static electricity comprehensive tester has been adjusted by the

manufacturer before leaving the factory. It is a product that can work continuously

and stably without the necessity of adjustment by the operator.

Inspection

According to the requirements of ANSI/ESDS2020, the user is recommended to

calibrate the human static electricity comprehensive tester once a year. Or

periodically check according to the time required by the user's Electrostatic

Discharge Control Program.

Maintenance

The human body electrostatic comprehensive tester is maintenance free and can be

used continuously. If the operator fails to use the product properly due to improper

Summary of content (13 pages)

PAGE 1
Hanchen Instrument TR7131/TR7132 Human Body Comprehensive Tester Product overview The human body static electricity comprehensive tester, by measuring the resistance of the system, is convenient and quick. Using the LED indicator light and the prompt voice to tell whether the tester passes the test. The test time is less than 2 seconds. The TR7131 provides four different specifications of wrist band test holes.
PAGE 2
use or damage caused by other reasons, please submit it to the supplier or manufacturer for maintenance, and do not dismantle and repair it by yourself. The current version of this manual is only applicable to the users of the human body electrostatic comprehensive tester, which contains important information of the instrument composition and operation instructions.
PAGE 3
TR7131 Human Body Comprehensive Tester 1
PAGE 4
Characteristics: 1. Three test modes: anti-static wrist strap / anti-static shoes (rings) / anti-static hand rings + shoes (rings) 2. Test range: provide upper and lower limit values, which can be customized and modified 3. LED display status (high / pass / low) 4. Pass signal output (access control type), which can be connected with access control attendance system, such as three roller gate / wing gate automatic door, to control personnel access 5.
PAGE 5
Technical Parameter Instrument size: (W) 166 x (L) 96 x (H) 40mm Setting value of left shoe: 750KΩ- 100MΩ Pedal size: (W) 420x (L) 400 x (H) 20mm Setting value of right shoe: 750KΩ- 100MΩ Adjustable distance of movable support: > 150 mm Wrist setting value: 750KΩ- 10MΩ Total weight: 6.
PAGE 6
The switching capacity is not more than 24V / 3A. When the access control needs to be output, connect the access control signal wire to the terminal block. A) when only the wrist strap is tested and the test passes, the access control output. C) when only two foot shoes are tested and the test passes, the access control output. D) when testing the wrist strap and feet shoes at the same time, when the test passes, the access control output. Operation 1.
PAGE 7
5
PAGE 8
TR7132 Human Body Comprehensive Tester Battery Model 6
PAGE 9
Characteristics Two test modes: anti-static wrist strap / anti-static shoe (ring) Test range: provide upper and lower limit values, which can be customized and modified. LED display status (HIGH / PASS / LOW) 9V battery power supply, can be used in flammable and explosive anti-static occasions, such as fireworks and firecrackers warehouse workshop, electronic factory, chemical enterprise military unit, small chemical dangerous place, civil explosives storage warehouse and use place.
PAGE 10
Technical Parameter Instrument size: (W) 160 x (L) 100 x (H) 40mm Setting value of left shoe: 750KΩ- 100MΩ Pedal size: 400x 400mm Setting value of right shoe: 750KΩ- 100MΩ Adjustable distance of movable support: > 150 mm Wrist setting value: 750KΩ- 10MΩ Total weight: 5.6kg Test accuracy: ± 10% The range of conductive shoes is 100KΩ- 35MΩ, and the measurement range can be customized according to the user's requirements Operation 1. The tester can be operated with 9V battery or AC power supply.
PAGE 11
Note: please do not wear gloves or press on metal test with fingernails. Installation 1. Install the bracket on the chassis and tighten the three screws with hexagon wrench. 2. Open the back cover of the test meter, put in the 9V square battery, align the hole at the back of the test meter with the screw post on the bracket, and fasten it. 3. Press down the test meter to ensure that the tester and the bracket are well connected. 4.
PAGE 12
TR7131 TR7132 10
PAGE 13
※Our Company: Hanchen Instrument ※Our Brand: Hanchen ※E-mail Address: servicewang2015@hotmail.com(US. CA. MX.