User Manual

4.7.3 Functional Codes
Functional
Code
Name
Range
Factory
Settings
Program
Modifications
U0.0.01
Display Mode
0: basic mode (prefix “P”)
1: user mode (prefix “U”)
2: checkout mode (prefix “C”)
1
No need to
modify this mode.
U0.0.02
Control Mode
0: V/F control
1: open-loop vector control
2: close-loop vector control
0
U0.0.03
Grinding Control
Mode Selection
0: panel control
1: terminal control
2: communication control
1
U0.0.11
Time of Speed Up
0000.0~6500.0s
0010.0
Extend or shorten
the time.
U0.0.12
Time of Speed Down
0000.0~6500.0s
0002.0
U0.1.16
Grinding Time before
Speed Down
0000.0~6500.0s
0002.0
U3.0.00
Grinding Mode
0: single cycle and stops
1: single cycle and keeps the value
2: always grinding
3: grinding N cycles
2
Modify it upon
your actual needs.
U3.0.01
Grinding Cycles
00000~65000
00000
U3.0.02
PLC Power Off
Selection
The first number: data recall selection
when the machine stops
0: not recall
1: recall
The second number: data recall
selection when the power suddenly
off
0: not recall
1: recall
00
U3.0.04
Grinding Time of
Phase 0
0000.0~6500.0min
0010.0
Extend or shorten
the time.
U3.0.06
Grinding Time of
Phase 1
0000.0~6500.0min
0010.0
U3.0.35
Grinding Direction of
H.010: default direction
H.010
No need to